China Masu kera da kuma masu fitar da kayayyaki masu inganci na Gilashin Epoxy-Phenolic (3240)

Takardun Gilashin Epoxy-Phenolic masu inganci (3240)

taƙaitaccen bayani:

Takardar Laminated Mai Tauri ta Gilashin Epoxy Phenolic 3240Ya ƙunshi zane mai laushi wanda ba shi da alkali wanda aka sanya shi a cikin gilashi kuma an haɗa shi da resin thermosetting epoxy phenolic, wanda aka lankwasa a ƙarƙashin zafin jiki da matsin lamba mai yawa. Tare da ƙarfin injina mafi girma da ƙarfin lantarki mai kyau, an yi shi ne don injinan lantarki ko kayan aikin lantarki azaman abubuwan haɗin gini ko sassa na rufin, har ma ana iya amfani da shi a ƙarƙashin yanayin danshi ko a cikin man transformer. Hakanan ya wuce gano abubuwa masu guba da haɗari (an ci gwajin REACH & RoHS).Lambar nau'in da aka yi daidai ita ce PFGC201, Hgw2072 da G3.

Kauri da ake da shi:0.5mm~200mm

Girman takardar da ake da shi:1500mm*3000mm,1220mm*3000mm,1020mm*2040mm,1220mm*2440mm,1000mm*2000mm da sauran girma dabam dabam da aka yi shawarwari a kansu.

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Domin biyan buƙatun abokan ciniki da suka wuce gona da iri, muna da ƙungiyarmu mai ƙarfi don samar da mafi kyawun mai samar da kayayyaki wanda ya haɗa da tallatawa, samun kuɗi, samarwa, fitarwa, sarrafawa mai kyau, tattarawa, adanawa da jigilar kayayyaki don Takardun Gilashin Epoxy-Phenolic mai inganci (3240). Bugu da ƙari, kasuwancinmu yana da inganci mai kyau da farashi mai ma'ana, kuma muna ba wa manyan masu samar da OEM ga wasu shahararrun samfuran.
Domin biyan buƙatun abokan ciniki da suka wuce gona da iri, muna da ƙungiyarmu mai ƙarfi don samar da mafi kyawun mai samar da kayayyaki wanda ya haɗa da tallatawa, samun kuɗi, samarwa, fitarwa, sarrafa inganci, tattarawa, adanawa da jigilar kayayyaki donTakardun da aka yi wa laminated na epoxy na kasar Sin da kuma Epoxy-Phenolic, Manufarmu ita ce "aminci da inganci da farko". Yanzu muna da kwarin gwiwar samar muku da kyakkyawan sabis da kayayyaki masu kyau. Muna fatan za mu iya kafa haɗin gwiwar kasuwanci mai cin nasara tare da ku a nan gaba!

Bukatun Fasaha

1.1Bayyanar:saman zanen ya kamata ya zama lebur kuma santsi, babu kumfa, wrinkles ko tsagewa, kuma babu wasu ƙananan lahani kamar ƙaiƙayi, tarkace, da sauransu. Gefen zanen ya kamata ya kasance mai tsabta kuma babu ɓarna da tsagewa. Launin zai kasance iri ɗaya, amma an yarda da wasu tabo kaɗan.

1.2Girma da aka yardahaƙuri

1.2.1 Faɗi da Tsawon Takardu

Faɗi & Tsawon (mm)	Juriya (mm)
＞970～3000	+/-25

1.2.2 Kauri da haƙurin da ba a san su ba

Kauri na asali (mm)

Juriya (mm)

Kauri na asali (mm)

Juriya (mm)

0.5

0.6

0.8

1.0

1.2

1.6

2.0

2.5

3.0

4.0

5.0

6.0

8.0

+/-0.12

+/-0.13

+/-0.16

+/-0.18

+/-0.20

+/-0.24

+/-0.28

+/-0.33

+/-0.37

+/-0.45

+/-0.52

+/-0.60

+/-0.72

+/-0.82

+/-0.94

+/-1.02

+/-1.12

+/-1.30

+/-1.50

+/-1.70

+/-1.95

+/- 2.10

+/-2.30

+/-2.45

+/- 2.50

+/- 2.80

Bayani: Ga kauri mara suna wanda ba a lissafa a cikin wannan tebur ba, karkacewar za ta kasance iri ɗaya da ta kauri mafi girma na gaba.

1.3Lanƙwasawa

Kauri (mm)

Lanƙwasawa

1000mm (Tsawon mai mulki) (mm)

500mm (Tsawon mai mulki) (mm)

3.0~6.0

＞6.0～8.0

＞8.0

≤10

≤8

≤6

≤2.5

≤2.0

≤1.5

1.4Injin sarrafa aiki:zanen gado ba za su lalace ba, ko kuma ɓaraguwa idan aka yi amfani da injinan yanka, haƙa rami, kona bututu da niƙa.

1.5Sifofin jiki, na inji da na lantarki

A'a.	Kadarorin	Naúrar	Matsakaicin ƙima	Matsakaicin ƙima
1	Yawan yawa	g/cm³	1.7~1.95	1.94
2	Sha ruwa (shafi na 2mm)	mg	≤20	5.7
3	Ƙarfin lanƙwasa, daidai da laminations	MPa	≥340	417
4	Ƙarfin tasiri (Charpy, notch)	kJ/m²	≥30	50
5	Ma'aunin watsawar Dielectric 50Hz	—	≤5.5	4.48
6	Dielectric constant 50Hz	—	≤0.04	0.02
7	Juriyar Rufi (Bayan awanni 24 a cikin ruwa)	Ω	≥5.0 x10⁸	4.9 x10⁹
8	Ƙarfin Dielectric, daidai da man transformer na laminationsin a 90℃+/-2℃, takardar 1mm	kV/mm	≥14.2	16.8
9	Wutar Lantarki Mai Rage Karfin Lantarki, daidai da man transformer na laminationsin a 90℃+/-2℃	kV	≥35	38

Shiryawa, Sufuri da Ajiya

Za a adana zanen gado a wurin da zafinsa bai wuce 40℃ ba, kuma a ajiye shi a kwance a kan farantin gado mai tsayin 50mm ko sama da haka. A ajiye shi nesa da wuta, zafi (na'urar dumama) da hasken rana kai tsaye. Tsawon lokacin adana zanen gado shine watanni 18 daga ranar da aka bar masana'anta. Idan tsawon lokacin ajiya ya wuce watanni 18, ana iya amfani da samfurin bayan an gwada shi don ya zama mai cancanta.

3240 (3)
3240 (4)

Bayani da Gargaɗi game da Amfani

Za a yi amfani da ƙaramin gudu da ƙaramin zurfin yanke g lokacin yin aiki saboda raunin tasirin zafi na zanen gado.

Yin amfani da injin da kuma yanke wannan samfurin zai fitar da ƙura da hayaki mai yawa. Ya kamata a ɗauki matakan da suka dace don tabbatar da cewa matakin ƙura yana cikin iyaka mai kyau yayin aiki. Ana ba da shawarar a yi amfani da iskar shaƙa ta gida da kuma amfani da abin rufe fuska na ƙura/ƙwaya.

Zane-zanen suna fuskantar danshi bayan an yi musu injin, ana ba da shawarar a shafa musu wani abu mai hana ruwa shiga.

Sassan injina 3240 (10)
Sassan rufin injin CNC (1)

Kayan Aikin Samarwa

3240 (7)
3240 (8)
3240 (9)
3240 (10)

Kunshin Ga Zane-zanen Laminated

3240 (12)
3240 (11) Domin biyan buƙatun abokan ciniki da suka wuce gona da iri, muna da ƙungiyarmu mai ƙarfi don samar da mafi kyawun mai samar da kayayyaki wanda ya haɗa da tallatawa, samun kuɗi, samarwa, fitarwa, sarrafawa mai kyau, tattarawa, adanawa da jigilar kayayyaki don Takardun Gilashin Epoxy-Phenolic mai inganci (3240). Bugu da ƙari, kasuwancinmu yana da inganci mai kyau da farashi mai ma'ana, kuma muna ba wa manyan masu samar da OEM ga wasu shahararrun samfuran.
Inganci mai kyauTakardun da aka yi wa laminated na epoxy na kasar Sin da kuma Epoxy-Phenolic, Manufarmu ita ce "aminci da inganci da farko". Yanzu muna da kwarin gwiwar samar muku da kyakkyawan sabis da kayayyaki masu kyau. Muna fatan za mu iya kafa haɗin gwiwar kasuwanci mai cin nasara tare da ku a nan gaba!